Bmw Inpa Keygen WORK
DOWNLOAD - https://blltly.com/2tAkH5
How to Install and Activate BMW INPA Software with Keygen
BMW INPA is a powerful diagnostic software that allows you to access various modules and functions of your BMW car. You can read and clear fault codes, perform coding and programming, reset service intervals, and more. However, to use BMW INPA, you need to install it correctly and activate it with a keygen.
In this article, we will show you how to install and activate BMW INPA software with keygen on Windows 10. We will use the BimmerGeeks Standard Tools package, which includes INPA, EDIABAS, NCS Expert, and other useful tools. We will also use the INPA K+DCAN USB interface cable, which is compatible with most BMW models from 1998 to 2008.
Step 1: Download and Unzip the Software Archives
The first step is to download the software archives from the links below:
INPA
Driver for the K+DCAN cable
BimmerGeeks Standard Tools
After downloading, unzip the archives to a convenient location on your computer. You should have three folders: INPA, Driver, and BimmerGeeks Standard Tools.
Step 2: Install INPA Software
The next step is to install INPA software on your computer. Follow these steps:
Open the INPA folder and run setup.exe as an administrator.
Follow the installation wizard without changing any info. Choose setup type "typical" and finish. There will be a "BMWINPA" icon on your desktop.
Right click on "My Computer" and select "Properties". Then click on "Advanced System Settings" and "Environment Variables". Under "System Variables", find "Path" and add ";C:\ediabas\bin" at the end. Save the changes.
Open "C:\EDIABAS\Hardware\ADS\ADS32" and double click on "ADSSETUP.EXE". A DOS window will appear for a second.
Restart your computer.
Copy the files from the "Crack (Bin files)" folder in the INPA archive into "C:\INPA\BIN". Replace the existing files.
Congratulations, you have installed INPA software successfully!
Step 3: Install BimmerGeeks Standard Tools
The next step is to install BimmerGeeks Standard Tools, which include EDIABAS, NCS Expert, and other useful tools. Follow these steps:
Open the BimmerGeeks Standard Tools folder and right click on St212.exe. Select "Troubleshoot compatibility" and then "Try recommended settings". Click on "Test the program" and then "Next". The installation will start.
During installation, click next and leave everything by default, except for the window where they offer to create a backup and shortcuts on the desktop. Uncheck all the boxes.
At the end of the installation, do not reboot your computer yet.
Go to drive C: and find the EC-APPS, EDIABAS & NCSEXPER folders. Replace them with the EC-APPS, EDIABAS & NCSEXPER folders from the BimmerGeeks Standard Tools archive.
In the BimmerGeeks Standard Tools archive, find the OCX folder. Copy its three files into C:\Windows\Syswow64 with a replacement.
Open a command prompt as an administrator. Type cd c:\windows\syswow64 and 061ffe29dd